-
(单词翻译:双击或拖选)
BARBARA KLEIN: Welcome to THIS IS AMERICA in VOA Special English. I'm Barbara Klein.
STEVE EMBER: And I’m Steve Ember. Today on our program, we visit the Bureau of Engraving1 and Printing in Washington, D.C. to hear how American dollars are made. In two thousand nine, the Bureau produced about twenty-six million bills a day.
Producing money requires both artistic2 and technological3 skills. Dollar bills are made so that they are interesting to look at but very hard to copy. In total, there are sixty-five separate steps required to make a dollar bill.
(MUSIC)BARBARA KLEIN: Guided tours of the Bureau of Engraving and Printing are a popular activity for visitors to Washington, D.C. These trips are a good way to learn new and interesting facts about the history of money and its complex production methods. It is also exciting to stand in a room with millions of dollars flying through machines.
TOUR GUIDE: "All right, ladies and gentlemen, once again welcome to the Bureau of Engraving and Printing. And this is where the color of money begins. The money making process begins when a yearly order sent by the Federal Reserve Board. That order will then be divided in half. Half will be done here in Washington, D.C. and the other half will be done in Fort Worth, Texas.”
STEVE EMBER: Next, the Bureau orders special paper from the Crane Paper Company in the state of Massachusetts. The paper is actually cloth since it is seventy-five percent cotton and twenty-five percent linen4.
This paper is made so that it can last a long time. And, it is made with details that make it hard to copy. For example, bills contain security threads. These narrow pieces of plastic are inside the paper and run along the width of the bill. This special paper is also made with very small blue and red fibers5. Both of these designs make it very hard to copy.
BARBARA KLEIN: The first step in production is called intaglio6 printing. This is done on high-speed presses using printing plates onto which images have been cut. Each plate receives a layer of ink, which gathers in the cut areas of the plate. Then, each piece of paper goes into the press to receive the printing plate. The machine forces about twenty tons of pressure onto the printing plate and paper. One side of a dollar bill is colored with green ink, while the other is printed in black. Each side must dry for about forty-eight hours.
STEVE EMBER: The printing plate used in this process is created from hand-cut engravings called master-dies. Highly skilled artists called engravers copy images on soft steel to make the dies. There are separate dies for the different images on the bill, such as the picture of the president, the lettering and other designs.
BARBARA KLEIN: After each master-die is copied, they are put together to make a printing plate that has thirty-two copies of the bill being printed. A master-die can last for many years. For example, the master-die with the picture of President Abraham Lincoln was made in the eighteen sixties. It was used again in two thousand eight to redesign the five-dollar bill.
Next, the large printed sheets are carefully examined to make sure there are no mistakes on any of the bills. This process used to be done by people. Now, computers do the work.
TOUR GUIDE: "OCIS is an acronym7 for Off-line Currency Inspection8 System and this is where the money from the last phase will be inspected. Now that blue box will take a picture to size of the sheets of the money and compare its cut, color and shape with the master image sent by the Federal Reserve Board. It will take that picture and break it down into over one million pixels. Every single last one has to be absolutely correct."STEVE EMBER: In this part of production, the thirty-two bill sheets are cut into sheets of sixteen. In the next step, a series of identifying numbers and seals are added to the bills.
TOUR GUIDE: “And this is where the money from the last phase will be put to its final state. If you look to the left of the room, ladies and gentlemen, there is a tall machine with green ink at the top of it. That is the machine that will print your serial9 numbers, Federal Reserve seal and Treasury10 seal onto the money.”
BARBARA KLEIN: The serial numbers on the money tell the order that the bills were printed. Other numbers and letters on the bill tell when the note was printed, what space on the printing plate the bill occupied and which Reserve Bank will issue the bill.
STEVE EMBER: Once the money is printed, guillotine cutters separate the sheets into two notes, then into individual notes. The notes are organized in “bricks,” each of which contains forty one-hundred-note packages. The bricks then go to one of twelve Federal Reserve Districts, which then give the money to local banks. Ninety-five percent of the bills printed each year are used to replace money that is in circulation, or that has already been removed from circulation. The Federal Reserve decides when to release this new money into use.
(MUSIC)BARBARA KLEIN: You may know that America's first president, George Washington, is pictured on the one-dollar bill. But do you know whose face is on the two, five, ten, twenty, fifty and one hundred-dollar bills? They are, in order, President Thomas Jefferson, President Abraham Lincoln, Treasury Secretary Alexander Hamilton, President Andrew Jackson, President Ulysses Grant and statesman Benjamin Franklin.
STEVE EMBER: During the tour, visitors can learn many facts about money. For example, the average life span of a one-dollar bill is twenty-one months. But a ten-dollar bill lasts only about eighteen months. The one hundred-dollar note lasts the longest, eighty-nine months.
One popular question that visitors ask is about the two-dollar bill. This bill is not made very often. This is because many Americans believe two-dollar bills are lucky, so they keep them. Two-dollar bills do not have to be manufactured often because they do not become damaged quickly like other bills.
People can send their damaged or torn bills to the Bureau of Engraving and Printing. The Bureau will replace damaged bills with new bills. However, it is illegal to purposely damage United States currency in any way. Anyone found guilty of damaging American money can be fined or jailed.
(MUSIC)BARBARA KLEIN: The Bureau of Engraving and Printing first began printing money in eighteen sixty-one. It operated in a room of the Treasury building. Two men and four women worked together there to place seals on money that was printed in other places by private companies.
Today, the Bureau of Engraving and Printing has over two thousand employees in its two printing centers in Washington and Texas.
STEVE EMBER: The Treasury Department continually works to change the design of bills to make it difficult to copy. One method it uses is called microprinting. For example, what looks like a very thin line around the edge of a picture may actually be the words “The United States of America” in very small letters. Also, many bills now have color-shifting ink that looks like metallic11 paint. In the last five years, the ten, twenty and fifty-dollar bills have been redesigned. All the bills are mostly green. But other colors are added when they are redesigned.
BARBARA KLEIN: The most recent note to be redesigned is the one hundred-dollar bill. This is the highest value bill currently made in the United States. More than ten years of research and development went into its new security features. They offer a simple way to make sure that a new one hundred-dollar note is real. For example, there is a blue ribbon woven into the front of the note.
If you tilt12 the note back and forth13 while looking at the blue ribbon, you will see bells on the note change to hundreds as they move. When you tilt the note back and forth, the bells and the hundreds move from side to side. If you tilt it from side to side, they move up and down.
STEVE EMBER: There is also an image of a bell inside a copper14-colored inkwell on the front of the note. Tilt the note to see the bell change from copper to green. This makes the bell seem to appear and disappear within the inkwell. There are several other security features in the redesigned one hundred-dollar bill.
Last month, the Federal Reserve Board announced a delay in releasing the new one-hundred dollar notes. The Bureau of Engraving and Printing identified a problem with creasing15 of the paper during printing. The new bills were supposed to be released February tenth, two thousand eleven. The Bureau is working to solve the problem.
(MUSIC)BARBARA KLEIN: Our program was written by Dana Demange and Shelley Gollust. Our producer was Brianna Blake. I’m Barbara Klein.
STEVE EMBER: And I’m Steve Ember. Our programs are online with transcripts16 and MP3 files at voaspecialenglish.com. And you can find us on Twitter, Facebook and YouTube at VOA Learning English. Join us again next week for THIS IS AMERICA in VOA Special English.
收听单词发音 |
1
engraving
|
|
| n.版画；雕刻（作品）；雕刻艺术；镌版术v.在（硬物）上雕刻（字，画等）( engrave的现在分词 )；将某事物深深印在（记忆或头脑中） | |
参考例句： |
|
|
|
|
2
artistic
|
|
| adj.艺术(家)的，美术(家)的；善于艺术创作的 | |
参考例句： |
|
|
|
|
3
technological
|
|
| adj.技术的；工艺的 | |
参考例句： |
|
|
|
|
4
linen
|
|
| n.亚麻布，亚麻线，亚麻制品；adj.亚麻布制的，亚麻的 | |
参考例句： |
|
|
|
|
5
fibers
|
|
| 光纤( fiber的名词复数 )； （织物的）质地； 纤维，纤维物质 | |
参考例句： |
|
|
|
|
6
intaglio
|
|
| n.凹版雕刻；v.凹雕 | |
参考例句： |
|
|
|
|
7
acronym
|
|
| n.首字母简略词，简称 | |
参考例句： |
|
|
|
|
8
inspection
|
|
| n.检查，审查，检阅 | |
参考例句： |
|
|
|
|
9
serial
|
|
| n.连本影片，连本电视节目；adj.连续的 | |
参考例句： |
|
|
|
|
10
treasury
|
|
| n.宝库；国库，金库；文库 | |
参考例句： |
|
|
|
|
11
metallic
|
|
| adj.金属的；金属制的；含金属的；产金属的；像金属的 | |
参考例句： |
|
|
|
|
12
tilt
|
|
| v.(使)倾侧；(使)倾斜；n.倾侧；倾斜 | |
参考例句： |
|
|
|
|
13
forth
|
|
| adv.向前；向外，往外 | |
参考例句： |
|
|
|
|
14
copper
|
|
| n.铜；铜币；铜器；adj.铜(制)的；(紫)铜色的 | |
参考例句： |
|
|
|
|
15
creasing
|
|
| （使…）起折痕，弄皱( crease的现在分词 )； （皮肤）皱起，使起皱纹； 挑檐 | |
参考例句： |
|
|
|
|
16
transcripts
|
|
| n.抄本（ transcript的名词复数 ）；转写本；文字本；副本 | |
参考例句： |
|
|
|
购买
在百度中搜索